Circulation, Vol 53, 992-996, Copyright © 1976 by American Heart Association
MG Bourassa, M Cantin, EB Sandborn and E Pederson
Following routine coronary arteriography, surface irregularities and
thrombogenesis of the inner and outer wall of six Ducor polyurethane and
six RPX polyethylene coronary catheters were studied by scanning electron
microscopy. Polyurethane catheters had rough and highly irregular external
and internal surfaces. All catheters showed adherent thrombi on their
external surface. The internal surface of three catheters showed evidence
of thrombosis. Polyethylene differed from polyurethane in several respects.
Although the external surface had an irregular and wavelike appearance, the
internal surface was smooth and regular. Two polyethylene catheters showed
thrombi on their external surface. The internal surface of one catheter
showed single platelets in one area. These results confirm recent reports
showing that internal and external surface irregularities play a major role
in the initiation of thrombosis in and on intravascular catheters. They
stress the need for high quality catheter materials with smooth and regular
surfaces in the prevention of thromboembolic complications from coronary
arteriography.
ARTICLES
Scanning electron microscopy of surface irregularities and thrombogenesis of polyurethane and polyethylene coronary catheters
This article has been cited by other articles:
![]() |
B. Jansen, G. Peters, and G. Pulverer Mechanisms and Clinical Relevance of Bacterial Adhesion to Polymers J Biomater Appl, January 1, 1987; 2(4): 520 - 543. [Abstract] [PDF] |
||||
|
Circulation Home | Subscriptions | Archives | Feedback | Authors | Help | AHA Journals Home | Search Copyright © 1976 American Heart Association, Inc. All rights reserved. Unauthorized use prohibited. |