Circulation, Vol 56, 617-622, Copyright © 1977 by American Heart Association
MD Silver and GJ Wilson
We examined 13 Beall model 104 prostheses recovered at surgery or autopsy
10 to 84 1/2 months after insertion and observed the pattern of prosthesis
wear. We defined wear as "mild" when the disc was notched but neither the
metal of the struts was exposed not the cloth seat torn. In "moderate" wear
the disc was notched, the Teflon coating of the struts was worn away
exposing the underlying metal but the cloth of the set was not torn. The
cloth seat was torn in "severe" wear, exposing the metal seat and causing a
different pattern of disc erosion. In one case this allowed the disc to
tilt into the valve lumen and, later, to escape from its cage. Most of the
prostheses studied showed "moderate" or "severe" wear. We believe that some
degree of wear is inevitable. Clinical signs and symptoms were not specific
but a rough correlation existed between the severity of hemolysis, as
indicated by serum LDH levels, and the degree of prosthesis wear. When wear
was "severe", the results of cardiac catheterization studies usually
mirrored the change, but there were a few exceptions. All patients with the
Beall model 104 prosthesis may eventually develop "severe" wear, and we
recommend regular reassessment with a view toward prosthesis replacement.
ARTICLES
The pathology of wear in the Beall model 104 heart valve prosthesis
This article has been cited by other articles:
![]() |
J. Gaw, D. R. Samant, W. R. Dietrick, and K. Venkataraman Longterm Complications of Beall Prosthetic Valve: A Case Report Angiology, August 1, 1984; 35(8): 519 - 522. [Abstract] [PDF] |
||||
|
Circulation Home | Subscriptions | Archives | Feedback | Authors | Help | AHA Journals Home | Search Copyright © 1977 American Heart Association, Inc. All rights reserved. Unauthorized use prohibited. |